Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 32 subscribers
  • Views 2093 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IDNO/ICP

Former Community Member
Former Community Member

Hello Chaps/Chapesses, 

I've been asked to look at using an IDNO/ICP to undertake the contestable part of a new connection, the client is hoping it will save some money rather than the DNO doing all the works. The list of providers is slightly overwhelming so I thought I would see if anyone has done this before and had any recommendations? 

It's a new 500kVA substation and 7 individual 3 phase connections to industrial units. 

Thanks in advance! 

  • 0

    perspicacious: 
    Apparently it is a superior meter “engineer” required for 3-phase.

    Yes. Scottish Power sent round an SP-qualified installer, who was a bit embarrassed. In due course I got £30 for the waste of my time.

  • Former Community Member
    0 Former Community Member

    A client is now into week 11 for two LV 3-phase dumb whole current meters and I'm sure he isn't far off asking me to connect directly into the cut-out!!!!!!

    10 days later:

    He's just had a bill for £72 for his meter “rental”…….

    Apparently, quite a robust conversation followed but it still didn't result in an appointment date…..

    Regards

    BOD

Community Rules & Guidelines