Tushar Kanti Mondal:


1. How many PPT slide it should be. any range?  

2  Should I explain in brief about my current job profile including brief of the projects with which I am currently involved.

3. All the 17 attributes should be in order in PPT slides?

4. Should I explain only one particular engineering solution to cover up all 17 or 5 major attributes or I can explain all of my activities or responsibilities as and where applicable against the C Eng attributes.

5. May I add any short video file duration of 2 to 3 minutes in my presentation to introduce my job profile?

6. Should I keep ready all the soft copy of supporting documents like training certificates, appreciation certificates and letters, evidence of engineering details for innovative solution?

This is just for the presentation, not the interview as a whole.

1. You only have 15 minutes, rule of thumb is one minute per slide, so around 15 slides is your maximum, more than that and you will either miss slides out or run over time.

• Not unless it is essential and this info will be in your application anyway. The presentation should focus on A/B and you dont have much time.

• Presentation needs to cover A and B, other competencies will be explored in a general Q&A after the presentation, dont worry too much about the order.

• If one solution covers both A and B, go for it. If you need separate projects/solutions to cover both main competencies then that is OK as well.

• I would strongly advise not to.

• In general these should be uploaded to your application online as attachments.

Tushar Kanti Mondal:


1. How many PPT slide it should be. any range?  

2  Should I explain in brief about my current job profile including brief of the projects with which I am currently involved.

3. All the 17 attributes should be in order in PPT slides?

4. Should I explain only one particular engineering solution to cover up all 17 or 5 major attributes or I can explain all of my activities or responsibilities as and where applicable against the C Eng attributes.

5. May I add any short video file duration of 2 to 3 minutes in my presentation to introduce my job profile?

6. Should I keep ready all the soft copy of supporting documents like training certificates, appreciation certificates and letters, evidence of engineering details for innovative solution?

This is just for the presentation, not the interview as a whole.

1. You only have 15 minutes, rule of thumb is one minute per slide, so around 15 slides is your maximum, more than that and you will either miss slides out or run over time.

• Not unless it is essential and this info will be in your application anyway. The presentation should focus on A/B and you dont have much time.

• Presentation needs to cover A and B, other competencies will be explored in a general Q&A after the presentation, dont worry too much about the order.

• If one solution covers both A and B, go for it. If you need separate projects/solutions to cover both main competencies then that is OK as well.

• I would strongly advise not to.

• In general these should be uploaded to your application online as attachments.