This discussion is locked.

You cannot post a reply to this discussion. If you have a question start a new discussion

V-Phase units...

Former Community Member over 13 years ago

I am an electrician, and have just stumbled onto the V phase website: http://www.vphase.co.uk/how-it...-technology-explained

I like the look of these, and if they stand up to their claims I will promote them to my domestic and commercial clients who often complain about their electricity bills.

However, after making some enquiries I am hearing conflicting opinions on whether or not these will in fact save money.

The website claims they save up to 17% on fridges, freezers and other motorized equipment and 3-5% on PC's.

Some people have said that they are an outright rip-off -that motors will just run longer and slower in fridge/freezers-whilst others have said fridge freezers will just run less efficiently i.e cooler, and some have said that the theory is sound they're waiting to see how well they perform in the field and for consumer confidence to increase.

I'm posting to see what the people here think of the concept, whether or not you think it will work and whether anyone has any experience they would like to share with them?

All replies/opinions welcomed...

Parents

0 Former Community Member over 5 years ago

There may be some specialised industrial uses where these may save money, but I am a loss to see the benefit in any reasonably modern building in the UK.

Any load that incorporates some kind of automatic control is not going to benefit.

Consider a common room heater.

Superficially, if the Voltage is turned down the power used by the resistive element is going to be less. However, if the room warms up more slowly it is going to take longer till the thermostat clicks off. The power used is the same! This also applies to kettles, irons, ovens and so on.

More complex loads use switching power supplies.

These are true power converters that react to having the supply Voltage is turned down by increasing the input current. A change, up or down, will result in the same power being used.

This includes CFL and LED lamps, PCs, TVs, phone chargers and inverter driven air conditioners.

Spending the money on common energy improvements will get better return on the investment.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Former Community Member over 5 years ago

There may be some specialised industrial uses where these may save money, but I am a loss to see the benefit in any reasonably modern building in the UK.

Any load that incorporates some kind of automatic control is not going to benefit.

Consider a common room heater.

Superficially, if the Voltage is turned down the power used by the resistive element is going to be less. However, if the room warms up more slowly it is going to take longer till the thermostat clicks off. The power used is the same! This also applies to kettles, irons, ovens and so on.

More complex loads use switching power supplies.

These are true power converters that react to having the supply Voltage is turned down by increasing the input current. A change, up or down, will result in the same power being used.

This includes CFL and LED lamps, PCs, TVs, phone chargers and inverter driven air conditioners.

Spending the money on common energy improvements will get better return on the investment.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

V-Phase units...

Join us to get the best from IET EngX.

Community Rules & Guidelines