Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 16 subscribers
  • Views 1055 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Gas explosion question

Stephen Biddle
Hi All


I've just had a gas explosion in an enclosure and I'm trying to remember my basic COMPEX stuff.  The enclosure is Ex e.  I must have had an explosive mixture and a source of ingnition.  I am trying to find the cause of both, but there's not much left of it to study.  Am I right in thinking that there should not normally be an explosive mixture in an Ex e box ie this is a rare event?  If so is the presence of gas in itself a fault to be rectified?


Stephen
Parents
  • 0
    Stephen,

    Agreed. I think the loose connection is a definite suspect. It could result in a spark, or alternatively could give rise to elevated temperatures causing ignition. If there had been a leak going on for six months but you had just done maintenance it is very suggestive.

    Alasdair
Reply
  • 0
    Stephen,

    Agreed. I think the loose connection is a definite suspect. It could result in a spark, or alternatively could give rise to elevated temperatures causing ignition. If there had been a leak going on for six months but you had just done maintenance it is very suggestive.

    Alasdair
Children
No Data

Community Rules & Guidelines