This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Graphic symbols for Diagrams of electrical power and control

It would appear that BS 3939 and IEC 617 etc covering graphic sysmbols of electrical Power and control have been withdrawn and not replaced or superseded. Can anybody advise me what standard  (if any) is now applaicabe for IEC Electrical Power amd control Grapahic symbols?


Alan Foxall
Parents
  • The BSI shop has the following note against this standard:

    In 2002 IEC launched an 'on-line' database format for the symbol library, available on subscription from the IEC web-site. Following this decision, in 2004 CENELEC decided to cease publication of EN 60617 in 'paper' form, to withdraw the then-existing standards and formally to adopt the IEC database without any changes for use in Europe. Consequently the British Standard versions must also now be withdrawn.


    The IEC database is available at http://std.iec.ch/iec60617  (for a fee, of course).

    Alasdair
Reply
  • The BSI shop has the following note against this standard:

    In 2002 IEC launched an 'on-line' database format for the symbol library, available on subscription from the IEC web-site. Following this decision, in 2004 CENELEC decided to cease publication of EN 60617 in 'paper' form, to withdraw the then-existing standards and formally to adopt the IEC database without any changes for use in Europe. Consequently the British Standard versions must also now be withdrawn.


    The IEC database is available at http://std.iec.ch/iec60617  (for a fee, of course).

    Alasdair
Children
No Data