Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • Locked Locked
  • Replies 161 replies
  • Subscribers 17 subscribers
  • Views 14235 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Confessions of an Electrician...

Lisa Miles

So while we’ve not been able to log into the community (you can do so now if you didn’t already know) I’ve been keeping myself out of mischief Blush by going through some of the discussion topics on the old Wiring Regs forum and came across this one: Walking off site where some of you were sharing stories about your experiences with client's pets while on the job. 


So I thought it would be a bit of fun to ask you to share some of your funny/bizarre or just weird stories (keeping it relatively clean and protecting the privacy of others please!) from any jobs you’ve been on or done.


… And I’ll send some swag to the author of the story that gets voted the ‘Most helpful/liked’ from the community so don't forget to hit that 'Good Answer' link on any that make you chuckle! (Log in required)



Parents
  • Not quite. It is working on a preview screen but when you open up the thread it has reverted to not working.

    I did a bit of experimentation after Andy's post and found it seems to work fine most of the time but you need to check that it has (I didn't post my experiments but just switched between source and message to see what was happening). I think what you should do is remove the & at the end of the word and replace it with ; (a semicolon). I also found it didn't seem to work unless you put a space in prior to switching to 'source', though it may just be me.

    Alasdair
Reply
  • Not quite. It is working on a preview screen but when you open up the thread it has reverted to not working.

    I did a bit of experimentation after Andy's post and found it seems to work fine most of the time but you need to check that it has (I didn't post my experiments but just switched between source and message to see what was happening). I think what you should do is remove the & at the end of the word and replace it with ; (a semicolon). I also found it didn't seem to work unless you put a space in prior to switching to 'source', though it may just be me.

    Alasdair
Children
No Data

Community Rules & Guidelines