This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Magnon magnetic vibrations are at the heart of electric light rather than electrons.



It was thought until recently that electricity was created by the movement of electrons around a circuit. This worked fine for batteries but AC required a way to transfer energy across an isolation transformer where the primary electrons never touch the secondary winding electrons.  We also know that electricity moves at nearly the speed of light, and as electrons are particles they would need a massive amount of energy to achieve this.

So we need to rethink how we can transmit electric light energy using magnons rather than electrons. As domestic electricity is alternating current [AC] it is really just a low frequency electromagnetic energy but subject to the same laws and restrictions as radio waves and sunlight rays.   

  To try and reconcile these requirements it is much easier to consider that magnons are at the inside heart of all types of electromagnetic vibrational energy which when introduced into matter molecules vibrates the inner nuclear magnetic moment and thus increase its temperature/pressure characteristics. To this end I wrote a blog on magnoflux     http://electricmagnofluxuniverse.blogspot.com/


2c22ce229b5da852cd5fa629afd23094-huge-magnonlitray.jpg

Parents
  • The hand with a twist is how electricity looks but what is wrong is the units shown in the x,y and z directions are totally misleading. The current i in the x direction is fine but at rightangles to this is the flux and NOT the flux density B.  The flux density is an area of magnetic flux in the x and y directions.  Thus to increase the flux/amp area we can increase the ampere-turns and create more magnoflux.  But this is massless and chargeless magnetic stuff and still has no volume in which to contain the spin energy.  This is provided by the EMF voltage applied in the final z direction.

    This is shown in the attached diagram.

    The result is that a balanced area of flux-current  will helix forward in the direction of the voltage giving a unit of magnetic power which if maintained for a second is energy


    POWER =  x  wbs X  EMFvolts Cos  
    Now if we multiple the two equal square roots together we get an area of flux amps  which is what we call current.  To make a volume the voltage must be at right angles to the current or a Cos ∅reductionwillresultinVARsratherthanWattsbeingproduced. 

    .

Reply
  • The hand with a twist is how electricity looks but what is wrong is the units shown in the x,y and z directions are totally misleading. The current i in the x direction is fine but at rightangles to this is the flux and NOT the flux density B.  The flux density is an area of magnetic flux in the x and y directions.  Thus to increase the flux/amp area we can increase the ampere-turns and create more magnoflux.  But this is massless and chargeless magnetic stuff and still has no volume in which to contain the spin energy.  This is provided by the EMF voltage applied in the final z direction.

    This is shown in the attached diagram.

    The result is that a balanced area of flux-current  will helix forward in the direction of the voltage giving a unit of magnetic power which if maintained for a second is energy


    POWER =  x  wbs X  EMFvolts Cos  
    Now if we multiple the two equal square roots together we get an area of flux amps  which is what we call current.  To make a volume the voltage must be at right angles to the current or a Cos ∅reductionwillresultinVARsratherthanWattsbeingproduced. 

    .

Children
No Data