Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 40 replies
  • Subscribers 17 subscribers
  • Views 4029 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

FORUM MEMBERS FAVORITE BISCUIT

John Peckham
Lisa Miles has suggested I should start this thread so this is it. So you have to state your preference and your technical reasoning.


For me it has to be a fig roll. My reasons are.


1. They are very tasty and nourishing.

2. They contain a high level of fruit so healthy eating as part of your 5 a day.

3. They have a very high structural integrity resilience post tea dipping.

4. They have a high level of crumb retention for munching over a key board.
Parents
  • Former Community Member
    0 Former Community Member
    When one of the posters mentioned perhaps someone should 3D print a biscuit it got me thinking, perhaps in these troublesome and uncertain times it may be time for all of us to be creative and preserve the future, the general statement "when we return to normal" is somewhat questionable as our powerful leaders are dismissing democracy, controlling the economy and seeking greater power which might be difficult for them to relinquish at a later date, could the new 'normal' be a Orwellian or even Dystopian world?


    So when you are sitting down in your gated community with your allocated rations and entertaining your future grandchildren you can mention that the factory down the road that now makes weapons or even medical equipment for the elite used to be a biscuit factory, it is obvious that junior will say, "Grandad what is a biscuit?" and you can say before the world went to pot I printed one and they were delicious when dunked in a hot beverage like tea, here is what they looked like.

    0c6a054df985128d32d1b39ec4a928db-huge-3d_1.png
    f125dcf69d4a76c40e2bcccc0670edc2-huge-3d_2.png


    Rob, be safe out there. ?


    For the Nerds:

    CAD: Solidworks, some recoding to do to create biscuit like appearance.

    Slicer: S3d

    Printer: Ender 3 / MK3S

    Filament: Light colour Woodfil PLA, Brown PETG
Reply
  • Former Community Member
    0 Former Community Member
    When one of the posters mentioned perhaps someone should 3D print a biscuit it got me thinking, perhaps in these troublesome and uncertain times it may be time for all of us to be creative and preserve the future, the general statement "when we return to normal" is somewhat questionable as our powerful leaders are dismissing democracy, controlling the economy and seeking greater power which might be difficult for them to relinquish at a later date, could the new 'normal' be a Orwellian or even Dystopian world?


    So when you are sitting down in your gated community with your allocated rations and entertaining your future grandchildren you can mention that the factory down the road that now makes weapons or even medical equipment for the elite used to be a biscuit factory, it is obvious that junior will say, "Grandad what is a biscuit?" and you can say before the world went to pot I printed one and they were delicious when dunked in a hot beverage like tea, here is what they looked like.

    0c6a054df985128d32d1b39ec4a928db-huge-3d_1.png
    f125dcf69d4a76c40e2bcccc0670edc2-huge-3d_2.png


    Rob, be safe out there. ?


    For the Nerds:

    CAD: Solidworks, some recoding to do to create biscuit like appearance.

    Slicer: S3d

    Printer: Ender 3 / MK3S

    Filament: Light colour Woodfil PLA, Brown PETG
Children
No Data

Community Rules & Guidelines