I received my PC Nailer from the US this morning, however the charger is a 120v US version not dual voltage, and I want to change it. Was thinking that rather than buying the UK model which would either be the Stanley or Black and Decker then I could just change the power adapter on it. The rating of the current adapter is 120v 60hz 770ma, output of 20v 1A. However the UK versions are slightly different for B&D and Stanley they are US Version UK Version Was thinking of getting something like - https://www.aliexpress.com/item/4001159381316.html?spm=a2g0o.productlist.0.0.45a66bceNzJeIa&algo_pvid=7d9330ae-94ea-4c45-baac-f128cd8e3545&algo_expid=7d9330ae-94ea-4c45-baac-f128cd8e3545-0&btsid=0b0a557216156484926828136e4e91&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ What be the best to get? is that one ok?

This discussion is locked.

You cannot post a reply to this discussion. If you have a question start a new discussion

Changing the power adapter some guidance on what to select.

Former Community Member over 3 years ago

I received my PC Nailer from the US this morning, however the charger is a 120v US version not dual voltage, and I want to change it. Was thinking that rather than buying the UK model which would either be the Stanley or Black and Decker then I could just change the power adapter on it.

The rating of the current adapter is 120v 60hz 770ma, output of 20v 1A.

However the UK versions are slightly different for B&D and Stanley they are

cadc4d5b8de9e1b602f50943981cd410-huge-img_c4561835f81f-1.jpg — US Version

a3a087d1ed79a6870987e2b850f06a88-huge-img_553f85738e3c-1.jpg — UK Version

Was thinking of getting something like - https://www.aliexpress.com/item/4001159381316.html?spm=a2g0o.productlist.0.0.45a66bceNzJeIa&algo_pvid=7d9330ae-94ea-4c45-baac-f128cd8e3545&algo_expid=7d9330ae-94ea-4c45-baac-f128cd8e3545-0&btsid=0b0a557216156484926828136e4e91&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

What be the best to get? is that one ok?

Parents

0 Former Community Member over 3 years ago

The full image is attached, I’ll open her up abs take a pic of the charger end. I did this before abs saw it had a pcb in it. So I assume the adapter/plug part is just down to 20v and this little board does everything else.

I don’t think it’s in the battery but probably in the charger. However I will check and come back.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Former Community Member over 3 years ago

The full image is attached, I’ll open her up abs take a pic of the charger end. I did this before abs saw it had a pcb in it. So I assume the adapter/plug part is just down to 20v and this little board does everything else.

I don’t think it’s in the battery but probably in the charger. However I will check and come back.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Changing the power adapter some guidance on what to select.

Join us to get the best from IET EngX.

Community Rules & Guidelines