Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 9 subscribers
  • Views 581 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

I have drilled a hole.........

AncientMariner
Well, I did not drill it, but about 50 years ago a colleague produced this question from his book:


"A cylindrical hole six inches long has been drilled straight through the centre of a solid sphere. What is the volume remaining in the sphere?"

Enjoy!

Clive
Parents
  • 0
    There's some ambiguities and missing information in that question.
    • What's the width (diameter) of the hole?

    • Does "straight through the centre" mean right through the sphere and out the other side, or does it only mean the hole was deep enough to get beyond the middle of the sphere?


    For an accurate result, there's a tricky complication.  The hole is being drilled into a curved convex surface.  If you drill a hole that's six incles long once it's drilled, then you have drilled away slightly more than six inches of material.
Reply
  • 0
    There's some ambiguities and missing information in that question.
    • What's the width (diameter) of the hole?

    • Does "straight through the centre" mean right through the sphere and out the other side, or does it only mean the hole was deep enough to get beyond the middle of the sphere?


    For an accurate result, there's a tricky complication.  The hole is being drilled into a curved convex surface.  If you drill a hole that's six incles long once it's drilled, then you have drilled away slightly more than six inches of material.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines