This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wiring and Body Aches.

I have been doing some hard manual work recently, screwing, drilling and floor board lifting etc. I have started to use my battery drill set on a low clutch setting for doing up and undoing screws as my hands really hurt and tingle at night with pins and needles


What labour saving tips has anyone got to save me falling apart please?


Z.
Parents
  • One of the customers asked if I am going to have a Zimmer frame with built in steps to get up into lofts, I am getting similar comments from the lads I work with.


    Two days ago I was following a bloke on a scooter with tool boxes built onto it and a surveyors telescopic ladder on the rear end, I was pondering if we could team up and do a White Helmets type display at the funfair in the car park at Brent Cross.
Reply
  • One of the customers asked if I am going to have a Zimmer frame with built in steps to get up into lofts, I am getting similar comments from the lads I work with.


    Two days ago I was following a bloke on a scooter with tool boxes built onto it and a surveyors telescopic ladder on the rear end, I was pondering if we could team up and do a White Helmets type display at the funfair in the car park at Brent Cross.
Children
No Data