i'm working on a little bridge PCB with USB C Male for one side and EVAFLEX 5 VS connector (http://www.i-pex.com/product/evaflex-5-vs) on the other side. The target of this is to replace the USB C cable by FFC connector. The USB C side is connected to USB C Female on RealSense D435i device (3D camera), and the other side will be connected by FFC to a PCIe to USB 3.0 outputs (RX, TX and D lines).
My question is, what happens with CC lines? On the original design that FFC is USB-C to USB-A cable. olansi air purifier
EDIT: I have broken USB-C connector of USB-C to USB A connector and I have found this:
I understand the RP function but, which is the capacitor C1 job?
