Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 9 subscribers
  • Views 747 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Is electricity not just a packet of low frequency magnetic light energy?

CliveS

 

Physicists know that particles cannot move at the speed of light, but domestic AC electricity does.

www.youtube.com/watch

 

Knowing that AC electrical power is essentially low frequency directional photon light; and if we consider that at the heart of each photon is a magnon, [which consists of a spinning area of magnetic magnoflux inertia in the x,y direction], then we can envisage that the magnon’s flux/amp spinning stuff can be attracted forward by an electric voltage at right-angles in the z direction to form a volume [packet] of wave energy.  But note, we need to give these magnons of inertia energy space to move in; because if we restrict the space by a phase angle we will get quantum virtual imaginary volt/amps VA just re-discovered by cosmologists and called phantom energy, rather than real power.

Power = Volts x Amps x Cos ϴ.

 

01cea38f66c7db83ac8aca5ae1b76200-huge-image.jpg

 

So how does an induction motor work if we have this new 3D model of electro-magnetism 

 

www.youtube.com/watch

 

The magnoflux spin effect will also have a huge significance if the universe is magnetised and polarised as can be seen in this blog 

 

https://magnoflux3d.wordpress.com/

Parents
  • 0

    What uncomfortable question ? Charges are being pumped into the line at the source end, in the current to voltage ratio set by the line impedance, and this exactly matches the rate at which current arrives and the field lines appear between the conductors at various places along the line.

    As part of my work I have been responsible for a pulse power training course which included the making and fixing of high speed voltage and current probes at the origin and along a mis terminated transmission line of reasonable length, and the launch of  a fast pulse. If you match the lengths of the cables to the scope (or allow for it) you can see the wave arriving later further along and that velocity ties in well with L and C per unit length.   There is no doubt what happens. It is simplified thinking that is the mistake.

    Mike.

Reply
  • 0

    What uncomfortable question ? Charges are being pumped into the line at the source end, in the current to voltage ratio set by the line impedance, and this exactly matches the rate at which current arrives and the field lines appear between the conductors at various places along the line.

    As part of my work I have been responsible for a pulse power training course which included the making and fixing of high speed voltage and current probes at the origin and along a mis terminated transmission line of reasonable length, and the launch of  a fast pulse. If you match the lengths of the cables to the scope (or allow for it) you can see the wave arriving later further along and that velocity ties in well with L and C per unit length.   There is no doubt what happens. It is simplified thinking that is the mistake.

    Mike.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines