Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 15 subscribers
  • Views 337 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Galvanised Plating on Cable Containment - Sacrificial Anode?

CSkinner

I've been learning about sacrificial anodes recently.

I was given a formula to calculate how long a sacrificial anode will last; using the total mass, atomic mass and ionic charge of the sacrificial material, as well as the electrical current running through the anode.

It brought my attention to Galvanised steel basket tray.
Galvanised steel has a covering of Zinc[2+] to protect the steel from the environment; and it would also have an induced current from cables running along it.

But would there be a Cathode to complete this circuit? Perhaps where the containment is grounded?
It would be interesting if grounding the containment actually accelerates the decay of the zinc.

Any thoughts would be appreciated.

Thanks

Parents
  • 0

    Hi Mike,

    Thanks for the response!

    Wouldn't it be in a perfect model that the same amount of metal is removed on one half cycle and then put back on the other half? In the real world could you expect an imperfect sine wave that could strip more of the zinc than it inevitably puts back on?

    But on the other-hand how would that work? 
    In the positive half cycle, the Zinc would be stripped off and converted to Zinc Oxide; the negative half cycle wouldn't be able to strip the oxygen from the Zinc, would it? (asking out of ignorance, here)

    I guess my question was more about if a weak capacitor could be formed between the steel containment and a Ground connection; in my mind if it does then it matches the sacrificial anode model, and (maybe along with an imperfect sine wave) you would get accelerated decay of the zinc at the grounding points.

Reply
  • 0

    Hi Mike,

    Thanks for the response!

    Wouldn't it be in a perfect model that the same amount of metal is removed on one half cycle and then put back on the other half? In the real world could you expect an imperfect sine wave that could strip more of the zinc than it inevitably puts back on?

    But on the other-hand how would that work? 
    In the positive half cycle, the Zinc would be stripped off and converted to Zinc Oxide; the negative half cycle wouldn't be able to strip the oxygen from the Zinc, would it? (asking out of ignorance, here)

    I guess my question was more about if a weak capacitor could be formed between the steel containment and a Ground connection; in my mind if it does then it matches the sacrificial anode model, and (maybe along with an imperfect sine wave) you would get accelerated decay of the zinc at the grounding points.

Children
No Data

Community Rules & Guidelines