Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 15 subscribers
  • Views 508 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

The Standard Finger

sean burt

Hi recently at work we had a use for the standard finger but had a bit of trouble sourcing one. so i have recently designed my own version. (non electrical) 

the black rivets would be replaced with nuts and bolts (work in progress) sizes are accurate to the standard. 

My question is would anybody be interested in such a thing??

p.s. also i have discovered that some research has been done on the size of the Standard finger and it may slightly small so i can also make it bigger than usual if required.

Thank you i look forward to any replies..

Sean

Parents
  • 0

    Update:

    i have now added the palm and hand representations. 

    sizes to standard.

    100mm long 20mm thick palm

    100mm long handle

    80mm Long and 12mm Diameter finger (studies have been done to show this may be to small)

    Baffle plate 75mm diameter.

    comes with precision finger tip.

    Printing will begin later...

    Thank you

    Sean

Reply
  • 0

    Update:

    i have now added the palm and hand representations. 

    sizes to standard.

    100mm long 20mm thick palm

    100mm long handle

    80mm Long and 12mm Diameter finger (studies have been done to show this may be to small)

    Baffle plate 75mm diameter.

    comes with precision finger tip.

    Printing will begin later...

    Thank you

    Sean

Children
No Data

Community Rules & Guidelines