Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 20 subscribers
  • Views 790 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Audio Mixer Problem.

Zoomup

Hello All, I have a faulty Citronic PRO-3 audio mixer. It runs on 9V A.C. The seller claims that he connected  a D.C. power supply

and after that the mixer produced a muffled output. The input has a four diode bridge rectifier at the input for the power, several

capacitors, and two 7915A three lead regulators plus one 78M05A three pin device prior to the main mixing board.

Any ideas where to look first when attempting a repair?

Thanks,

Z.

Parents
  • 0

    Hi Zoom

    OK I looked it up. 9VAC supply so how does it get more than 15V? The spec says the current is 1A, quite a lot, does it have another transformer in it? Look  at the rectified DC, what voltage? It has USB connections, so thats what the 5V is for, but it also weighs a lot, 3.4 kg, so I suspect another transformer with 9V input. If DC was applied to this anything could have happened!

Reply
  • 0

    Hi Zoom

    OK I looked it up. 9VAC supply so how does it get more than 15V? The spec says the current is 1A, quite a lot, does it have another transformer in it? Look  at the rectified DC, what voltage? It has USB connections, so thats what the 5V is for, but it also weighs a lot, 3.4 kg, so I suspect another transformer with 9V input. If DC was applied to this anything could have happened!

Children
No Data

Community Rules & Guidelines