Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • Locked Locked
  • Replies 18 replies
  • Subscribers 21 subscribers
  • Views 2594 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Zoomup's pipes

Chris Pearson

Hived off from the electrical section.

Pitch believed to be 1.5mm.

Z

Pictures. I had to saw through the pipes to get a socket onto the fittings to get them to turn for removal. They were rusted onto the steel pipes

Parents

  • if you can rescue the flared pipe tails, it may at a push be possible to sleeve braze or silver solder a plain cylinder to connect to a new pipe - sort of  like a plumbers capillary fitting I fear that if not then a flaring cap tool will need to be made- the profile will need to be copied well enough to seal the O-ring maybe  200um. Nitryl O ring? M.

Reply

  • if you can rescue the flared pipe tails, it may at a push be possible to sleeve braze or silver solder a plain cylinder to connect to a new pipe - sort of  like a plumbers capillary fitting I fear that if not then a flaring cap tool will need to be made- the profile will need to be copied well enough to seal the O-ring maybe  200um. Nitryl O ring? M.

Children
No Data

Community Rules & Guidelines