Back in the days of yore I was half handy with an arc welder but I'm aware that things have moved on a bit. I've a "need" (Mrs G's inverted commas) to repair/alter a few things so what would you suggest would be a good option for the following? A 2mm mower deck needs a patch, a 4mm tractor bucket likewise and a trailer needs fettling with 6mm angle. Budget is an issue!
The Introduction to TIG welding courses I found is at the Holme Lacey campus of Herefordshire and Ludlow College.
https://www.hlcollege.ac.uk/course/580f774745408/Introduction-to-TIG-Welding
The college is immediately adjacent to the Warners Holme Lacey Hotel, I think the college which is an agricultural college was actually originally the estate farm of the big house that is the hotel.
If you like living dangerously you could book a midweek break at Warners with your wife, then slip away for a days welding tuition leaving her to partake in the activities at the hotel.
The Introduction to TIG welding courses I found is at the Holme Lacey campus of Herefordshire and Ludlow College.
https://www.hlcollege.ac.uk/course/580f774745408/Introduction-to-TIG-Welding
The college is immediately adjacent to the Warners Holme Lacey Hotel, I think the college which is an agricultural college was actually originally the estate farm of the big house that is the hotel.
If you like living dangerously you could book a midweek break at Warners with your wife, then slip away for a days welding tuition leaving her to partake in the activities at the hotel.
