This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

How to wire up a consumer unit

A semi-detached house has a prehistoric fuse box with rewirable ceramic fuses. It will shortly be replaced with a modern consumer unit. The existing circuits are:



 



1. Lights



2. Upstairs sockets



3. Downstairs sockets



4. Kitchen sockets



5. Cooker



6. Shower



 



The following circuits will be added to the consumer unit:



 



7. Central heating



8. Burglar alarm and CCTV



9. Outside lights



 



I have been informed that the best choice is a split load consumer unit with two RCDs and space for RCBOs. My intention is that circuit 8 has its own RCBO but what is the optimal way to allocate circuits to RCD A and RCD B? Also, should any other circuits have their own RCBO?


Parents
  • Clive, yes some RCBOs do differentiate as Andy AJJ states. The Garo ones and at least one other make do same, however an ordinary person might be confused by it - you ask `em and the are not sure. Like you I do prefer the all RCBO scenario but readily admit that mine (like many others) are a front end RCD covering all 12 circuits and has been like that since it was "in vogue" many years ago with no real problems encountered in practice (yet!)
Reply
  • Clive, yes some RCBOs do differentiate as Andy AJJ states. The Garo ones and at least one other make do same, however an ordinary person might be confused by it - you ask `em and the are not sure. Like you I do prefer the all RCBO scenario but readily admit that mine (like many others) are a front end RCD covering all 12 circuits and has been like that since it was "in vogue" many years ago with no real problems encountered in practice (yet!)
Children
No Data