Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 27 subscribers
  • Views 1762 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Keyless Chuck Loosening Problem.

Zoomup
I use a Hitachi DV 18DGL battery drill for a lot of my work. It is very good and the battery lasts a long time and charges up quickly when needed.


BUT, when in use the keyless chuck comes loose and the drill bit does not turn due to a poor hold. I have two of these drills and the same problem exists with both chucks. Is it a design problem or a bad batch of chucks? I do not know. Other makes of keyless chucks that I have used over the years hold the drill bits securely and do not come loose even if using a hammer action.


Is there a solution? Perhaps I should pour some fine sand into the chucks.


Z.
Parents
  • 0

    hifly:

    I had this problem as i was using the motor to tighten it by holding the chuck and spinning the motor, when I started tightening while it was not running it's fine and never comes undone.


    Vince




    Now there's a thing. I will try that hifly. Thanks hifly and all.


    Z.

Reply
  • 0

    hifly:

    I had this problem as i was using the motor to tighten it by holding the chuck and spinning the motor, when I started tightening while it was not running it's fine and never comes undone.


    Vince




    Now there's a thing. I will try that hifly. Thanks hifly and all.


    Z.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines