Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 88 replies
  • Subscribers 32 subscribers
  • Views 5360 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Recommended checks before CU change

Former Community Member
Former Community Member
As most of you know I’ve only been qualified for just over a year and I’ve got a quote to do for a cu upgrade.


I know I’m nowhere experienced enough to do EICR’s yet, but what would you guys recommend I check/test before doing the cu upgrade and should I do these checks/tests at the quote stage?
Parents
  • Former Community Member
    0 Former Community Member
    Then I forgot to put it back on when I was doing my rfc continuity tests to the circuits on the right of main switch and little finger brushed the live tail. 


    The big big question now though is:


    As the IR figures were really low (0.42mohms), do I quote not to get the job, quote to get the job and hope the IR is good after all or quite and include extra for the extra remedial work and if not needed, don’t charge?


    As I need this job for my reassessment, I’m thinking quite with a few extra hours included for potential remedial works, or even bite the bullet and quote for just the cu replacement.


    Luckily, I have a full time job, so by just doing any remedial work won’t actually lose me any money, just my time. 

Reply
  • Former Community Member
    0 Former Community Member
    Then I forgot to put it back on when I was doing my rfc continuity tests to the circuits on the right of main switch and little finger brushed the live tail. 


    The big big question now though is:


    As the IR figures were really low (0.42mohms), do I quote not to get the job, quote to get the job and hope the IR is good after all or quite and include extra for the extra remedial work and if not needed, don’t charge?


    As I need this job for my reassessment, I’m thinking quite with a few extra hours included for potential remedial works, or even bite the bullet and quote for just the cu replacement.


    Luckily, I have a full time job, so by just doing any remedial work won’t actually lose me any money, just my time. 

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines