Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 35 replies
  • Subscribers 32 subscribers
  • Views 5214 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Connecting Multiple Bemco/Ryefield Boards

GHEC
Ok I have a new build project where one Bemco/Ryefield board is not large enough to cover all apartments. 


I will need to install 3 to cover the number of outgoing ways required.


My questions is this. Given that there is one incoming bulk supply, what options are there to split it between the three? I know Lucy do an MSDB with a vertical busbar. Would the DNO accept daisy chaining these together? Or should we use a busbar chamber and tap-off to each board?


Any advice would be gratefully received.
Parents
  • Former Community Member
    0 Former Community Member
    Edited to say just noticed the 3 phase bit. Ryefield do make 3 phase versions, but obviously size is a very limiting factor.  35 flats x 3 phases = A HUGE AMOUNT OF FUSES


    Could you have 1 Ryefield per floor, or per 2 floors to keep the distances and number of ways down.


    Have you spoken to Ryefield? Most of these are pretty much made to order anyway, they might have a solution.
Reply
  • Former Community Member
    0 Former Community Member
    Edited to say just noticed the 3 phase bit. Ryefield do make 3 phase versions, but obviously size is a very limiting factor.  35 flats x 3 phases = A HUGE AMOUNT OF FUSES


    Could you have 1 Ryefield per floor, or per 2 floors to keep the distances and number of ways down.


    Have you spoken to Ryefield? Most of these are pretty much made to order anyway, they might have a solution.
Children
No Data

Community Rules & Guidelines