Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 35 replies
  • Subscribers 32 subscribers
  • Views 5218 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Connecting Multiple Bemco/Ryefield Boards

GHEC
Ok I have a new build project where one Bemco/Ryefield board is not large enough to cover all apartments. 


I will need to install 3 to cover the number of outgoing ways required.


My questions is this. Given that there is one incoming bulk supply, what options are there to split it between the three? I know Lucy do an MSDB with a vertical busbar. Would the DNO accept daisy chaining these together? Or should we use a busbar chamber and tap-off to each board?


Any advice would be gratefully received.
Parents
  • 0
    Hi PeteTLM


    I'll get in touch with Ryefield and see if they have any solutions. In terms of using a panel board, I think we can only go down that route if we change the metering strategy, i.e. if the landlord has one in coming bulk supply they charges residents for electric via an MID meter.
Reply
  • 0
    Hi PeteTLM


    I'll get in touch with Ryefield and see if they have any solutions. In terms of using a panel board, I think we can only go down that route if we change the metering strategy, i.e. if the landlord has one in coming bulk supply they charges residents for electric via an MID meter.
Children
No Data

Community Rules & Guidelines