Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 35 replies
  • Subscribers 32 subscribers
  • Views 5200 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Connecting Multiple Bemco/Ryefield Boards

GHEC
Ok I have a new build project where one Bemco/Ryefield board is not large enough to cover all apartments. 


I will need to install 3 to cover the number of outgoing ways required.


My questions is this. Given that there is one incoming bulk supply, what options are there to split it between the three? I know Lucy do an MSDB with a vertical busbar. Would the DNO accept daisy chaining these together? Or should we use a busbar chamber and tap-off to each board?


Any advice would be gratefully received.
Parents
  • 0
    I have designed quite a few blocks of flats from low rise up to 2 x 40 story modular builds.


    How many flats per floor and how many floors. Anything else to be. Supplied such as gym, laundry, shops etc?
Reply
  • 0
    I have designed quite a few blocks of flats from low rise up to 2 x 40 story modular builds.


    How many flats per floor and how many floors. Anything else to be. Supplied such as gym, laundry, shops etc?
Children
No Data

Community Rules & Guidelines