This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Connecting Multiple Bemco/Ryefield Boards

Ok I have a new build project where one Bemco/Ryefield board is not large enough to cover all apartments.

I will need to install 3 to cover the number of outgoing ways required.

My questions is this. Given that there is one incoming bulk supply, what options are there to split it between the three? I know Lucy do an MSDB with a vertical busbar. Would the DNO accept daisy chaining these together? Or should we use a busbar chamber and tap-off to each board?

Any advice would be gratefully received.

Parents

0 Engineer01 over 5 years ago

John Peckham:

I have designed quite a few blocks of flats from low rise up to 2 x 40 story modular builds.

How many flats per floor and how many floors. Anything else to be. Supplied such as gym, laundry, shops etc?

Hi John,

Have you ever come across a block of flats which are served from a rising busbar to the BEMCO's?

Whats your typical supplying arrangement / metering strategy out of curiosity?

Just interested to see how others design large resi jobs.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Engineer01 over 5 years ago

John Peckham:

I have designed quite a few blocks of flats from low rise up to 2 x 40 story modular builds.

How many flats per floor and how many floors. Anything else to be. Supplied such as gym, laundry, shops etc?

Hi John,

Have you ever come across a block of flats which are served from a rising busbar to the BEMCO's?

Whats your typical supplying arrangement / metering strategy out of curiosity?

Just interested to see how others design large resi jobs.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Connecting Multiple Bemco/Ryefield Boards

Community Rules & Guidelines