Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 32 subscribers
  • Views 1925 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Intumescent/non-combustible sleeving/ducting in timber-framed buildings.

Farmboy
PE magazine have run the article 'Wiring Timber-Frame Buildings' (a typical construction example shown in the attachment), which seems similar to those alluded to by ES1st (in their BP Guide 5, Fire Safety).


When installing wall fans in timber-framed buildings, one option is to use intumescent sleeving (such as shown in the attachment) for flexible ducting (but seems quite expensive at approx £60 for a standard 100mm ducting up to 500mm). Another option is use non-combustible/metal ducting (as suggested in BPG5). However, does anyone know of a supplier for such metal ducting (fire rated or proven for such use)? When I ask wholesalers and fan manufacturers, they all seem bemused (with some saying they don't think anyone bothers to use them), and as yet a google search reveals little help.


F
attachments.zip
Parents
  • 0

    I would have thought that by the time a room fire had become so intense that sparks or flames were being sucked into the extractor fan, the smoke alarms or fire alarms would have sounded and the fire would either have been put our with a fire extinguisher or the room door closed, area evacuated, and the fire and rescue people summoned.



    Building regs seem to have other ideas - hence the requirement for certain building elements to have a 60-, 90- or 120-minute fire resistance. Sticking a plastic "chimney" right through such an element I would have thought would compromise it quite significantly. Even without the fan running the duct will likely induce a chimney effect and draw hot products of combustion through quite effectively.


      - Andy.
Reply
  • 0

    I would have thought that by the time a room fire had become so intense that sparks or flames were being sucked into the extractor fan, the smoke alarms or fire alarms would have sounded and the fire would either have been put our with a fire extinguisher or the room door closed, area evacuated, and the fire and rescue people summoned.



    Building regs seem to have other ideas - hence the requirement for certain building elements to have a 60-, 90- or 120-minute fire resistance. Sticking a plastic "chimney" right through such an element I would have thought would compromise it quite significantly. Even without the fan running the duct will likely induce a chimney effect and draw hot products of combustion through quite effectively.


      - Andy.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines