Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 32 subscribers
  • Views 890 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RCD types

Farmboy
Regarding RCD types, AC, A, F, etc. Do these classification/types apply only to RCD's installed in CU's/DB's, or to RCD's incorporated in RCD sockets and fused connection units as well? A manufacturer is getting back to me about their products later in the week, and I'd like to have something to compare their answer to.


F
Parents
  • 0

    I would be interested to know of any manufacturers willing to declare that their product will disable probably the most widely used general type AC RCD :)



    In terms of manufacturer's declaring that their product is intended to disable an RCD the only one I can think of are the loop testers with the old 'D-Lok' function (but that at least does demonstrate the underlying physics).


    I think in terms of ordinary appliances I think it's more of a case of the industry gradually realizing that there's a problem that even fault-free RCDs might not trip when they should, rather than appliance manufacturers jumping up and down to draw anybody's attention to the fact. EVSE equipment manufacturers are probably the most open at the moment.


      -  Andy.
Reply
  • 0

    I would be interested to know of any manufacturers willing to declare that their product will disable probably the most widely used general type AC RCD :)



    In terms of manufacturer's declaring that their product is intended to disable an RCD the only one I can think of are the loop testers with the old 'D-Lok' function (but that at least does demonstrate the underlying physics).


    I think in terms of ordinary appliances I think it's more of a case of the industry gradually realizing that there's a problem that even fault-free RCDs might not trip when they should, rather than appliance manufacturers jumping up and down to draw anybody's attention to the fact. EVSE equipment manufacturers are probably the most open at the moment.


      -  Andy.
Children
No Data

Community Rules & Guidelines