Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 26 replies
  • Subscribers 32 subscribers
  • Views 2165 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Tough Meter Tails.

Zoomup
I reused some old meter tails today, cira 1980s. Wow, did they bend easily. It was a delight to use them. Why oh why are modern meter tails so difficult to bend into shape. Is the copper harder? I even heard a meter installer complaining about how he hated trying to bend modern meter tails.


P.s. Is that why modern meter tails come loose so easily in main switch terminals if we just look at them? There is no "give". They are just so rigid.


Z.
Parents
  • 0
    I see Doncaster Cables now make a 19 strand 25mm2 6181Y meter tail.  Should be quite a bit more flexible than the 7 strand version.  Bending radius is the same though which makes bottom entry into most (if not all) Consumer Units either very awkward or almost impossible.
Reply
  • 0
    I see Doncaster Cables now make a 19 strand 25mm2 6181Y meter tail.  Should be quite a bit more flexible than the 7 strand version.  Bending radius is the same though which makes bottom entry into most (if not all) Consumer Units either very awkward or almost impossible.
Children
No Data

Community Rules & Guidelines