The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Checking Appliance Earthing.

Today I spoke to the manager of a local chain of domestic appliance retail shops. The chain sells and installs appliances like cookers and ovens etc. I asked the manager if they carry out an earth fault loop impedance test to confirm adequate earthing of the supply circuits and good earthing of appliances like cookers. He said that they did not. He asked me what test gear is used to carry  out the tests. I was shocked by this. People are having appliances installed by unqualified installers and the earthing effectiveness is not being tested.


Also his shop has nuisance tripping of the R.C.D. when several appliances are turned on. In particular washing machines cause tripping. Probably down to the 50 appliances each leaking a small current to earth via their internal mains filters. Get the cheapest quote. That''ll do. That's Norfolk for you.



Z.


Z.
Parents
  • Installing a hard wired cooker or hob however will involve rather more than a plug and socket, or at least it should do.

    Equally if it is a 'like for like' replacement of say a cooker, there is no legal need to leave the installation any safer than it was before, but I agree, at least morally, a plug in socket tester or a continuity check would be the right thing to do.
Reply
  • Installing a hard wired cooker or hob however will involve rather more than a plug and socket, or at least it should do.

    Equally if it is a 'like for like' replacement of say a cooker, there is no legal need to leave the installation any safer than it was before, but I agree, at least morally, a plug in socket tester or a continuity check would be the right thing to do.
Children
No Data