This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

more electronics than electrics - battery and charging question

this pic --> https://drive.google.com/file/d/1gunP4gFyIucj0ITstccf2D2szu3cw17O/view


is of parts of a radio that has a compartment for a rechargeable battery. 


From the pic and the pin voltages I measured (measurements not accurate I'm sure), is it possible to 'suggest' how the battery was wired/connected to the pins ?


It is a Genus Type-R DAB radio from yesteryear and the manufacturer no longer exists and getting hold of tech diagrams or info from other sources has proved fruitless.  The base plate states 7.2V battery pack.


Some companies have suggested they can put together a battery unit for me to fit, but they need to know how the leads need to be connected from the battery to the internal charging connector (4 pins)  and I cannot get from anywhere a manual, or a picture etc.


If it is possible to work out from the above picture etc, please let me know though I doubt without the manufacturer info it is likely possible (from what I've been told so far).  Additionally, I tried contacting one person who I found selling the radio, but they too had no battery to send a pic of.


Regards

Habs
Parents
  • you can recharge primary cells as well, so long as you keep an eye on the rising voltage and don't let them blow up.  Typically ten charges or so, before the re-plating is so irregular they leak. Nothing like as good as a proper rechargeable of course , but worth a punt if you have the kit.
Reply
  • you can recharge primary cells as well, so long as you keep an eye on the rising voltage and don't let them blow up.  Typically ten charges or so, before the re-plating is so irregular they leak. Nothing like as good as a proper rechargeable of course , but worth a punt if you have the kit.
Children
No Data