Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 42 replies
  • Subscribers 32 subscribers
  • Views 8037 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Earthing and the radio amateur

Stewart Mason
I've recently joined the IET forums. I replied to a  topic regarding amateur radio and PME on the old forum. Unfortunately I cant access the old forum anymore so I thought it would be best to start a new topic.


So. On the bench there is a transceiver with a metal case. Next to the transceiver there is a antenna tuning unit which is connected to a antenna system which is using an earth rod. Am I right in saying there is a chance of a potential difference between the two metal cases of the equipment regardless if it is a TT, TNS or TNCS?


What would be the ideal solution?  Put the shack on it's own TT supply and bond all the radio equipment back to the MET of the TT and if a earth rod is used for the antennas connect that back to the MET also?


If the TT system was not an option what would be best if the supply was a PME and you didn't want to use balanced antennas removing the use of an earth rod? 


To be honest I've never really given PME's and amateur radio much thought which in hindsight was probably a mistake. I do remember when I did my training an earth rod was recommended for the radios.


Apologies for being so random.


Stewart M0SDM
Parents
  • Former Community Member
    0 Former Community Member
    I am considering putting my ham rig my bedroom.  The property is PME fed.  I thought I would use an mains isolation transformer 240v - 240v  1.5Kw and isolate the earth at output sockets.  There is a radiator in the bedroom which is fairly close to where the station will be.


    The antenna has an earth rod installed well outside the PME field of anywhere.  The station has an earth bar to which all metalwork of the station is connected.


    This is like a fully isolated TT supply with no connection  to the MET and fully isolated (by TX) line connections.


    Your comments would be appreciated.


    Mike. GW6UWW
Reply
  • Former Community Member
    0 Former Community Member
    I am considering putting my ham rig my bedroom.  The property is PME fed.  I thought I would use an mains isolation transformer 240v - 240v  1.5Kw and isolate the earth at output sockets.  There is a radiator in the bedroom which is fairly close to where the station will be.


    The antenna has an earth rod installed well outside the PME field of anywhere.  The station has an earth bar to which all metalwork of the station is connected.


    This is like a fully isolated TT supply with no connection  to the MET and fully isolated (by TX) line connections.


    Your comments would be appreciated.


    Mike. GW6UWW
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines