The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Electric cooker switches

I hope that this doesn't come across as a daft question...


Why do most electric cooker switches have an in-built socket? Do analogous cooker switches exist in other countries that use different types of mains sockets?


I used to think that the socket was for plugging in a gas cooker electric ignition, but there is no real reason for having a separate circuit from the ring main for this.
Parents
  • I`ve always understood it was for occasional use of a kettle. At a time when sockets were few, i.e. one per household or one on ground floor and one on first floor. It made sense to fit this scoket by incorporating it to a cooker circuit. That`s why we diversify the kettle to 5amp because it aint running for long.


    Now a washer or dryer is a whole new ball of wax and best not allowed.
Reply
  • I`ve always understood it was for occasional use of a kettle. At a time when sockets were few, i.e. one per household or one on ground floor and one on first floor. It made sense to fit this scoket by incorporating it to a cooker circuit. That`s why we diversify the kettle to 5amp because it aint running for long.


    Now a washer or dryer is a whole new ball of wax and best not allowed.
Children
No Data