Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 32 subscribers
  • Views 1937 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

TESTING AN RCBO AT A LIGHT SWITCH

ietmgreen
I asked this question some time ago, but during the site changeover I somehow got locked out.

So I would like to ask again.


Is it acceptable, using a two-wire RCBO tester (Megger RCDT320), to test at a light switch using the phase and earth wires?

If it is acceptable are there any disadvantages?

Regards,

Mike.
Parents
  • 0
    To what ends?

    If you can carry out a two wire non-trip earth loop test to confirm earth continuity and a RCD test at the light switch, what is to be gained by dismantling the consumer unit?
Reply
  • 0
    To what ends?

    If you can carry out a two wire non-trip earth loop test to confirm earth continuity and a RCD test at the light switch, what is to be gained by dismantling the consumer unit?
Children
No Data

Community Rules & Guidelines