Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 33 replies
  • Subscribers 32 subscribers
  • Views 2865 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Vermin control in a new electrical Installation-Old large house

Billy Boy
Hi 

I would like to know if anyone has had the experience to install an electrical installation designed for Vermin control, ie rats, mice, Glis Glis,  etc

We are looking to take on a large house refurb in the country and part of the design spec is to carry out an installation that will protect against Vermin.

So would we be looking at a twin and earth system, or a complete screwed conduit system?

to be clear it is an old house with large old joists so a conduit system would be very hard and expensive.

Is there a risk assessment for such installations? and is there a wiring spec or IET guidance?


Thanks in advance


Billy


Parents
  • 0

    Chris Pearson:




    Sparkingchip:

    If the old house is being totally renovated then there should not be a vermin problem upon completion of the work, if it’s a partial renovation then cables need to be routed and installed appropriately to avoid vermin damage.




    There won't a vermin problem in the sense that the electrical installation will be brand new, but how do you keep them out in future?


     




    In the same way you improve the thermal efficiency of the house, fill the holes in behind the consumer unit etc. It will also reduce the risk of fire spreading within the property .

Reply
  • 0

    Chris Pearson:




    Sparkingchip:

    If the old house is being totally renovated then there should not be a vermin problem upon completion of the work, if it’s a partial renovation then cables need to be routed and installed appropriately to avoid vermin damage.




    There won't a vermin problem in the sense that the electrical installation will be brand new, but how do you keep them out in future?


     




    In the same way you improve the thermal efficiency of the house, fill the holes in behind the consumer unit etc. It will also reduce the risk of fire spreading within the property .

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines