This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Vermin control in a new electrical Installation-Old large house

Hi 

I would like to know if anyone has had the experience to install an electrical installation designed for Vermin control, ie rats, mice, Glis Glis,  etc

We are looking to take on a large house refurb in the country and part of the design spec is to carry out an installation that will protect against Vermin.

So would we be looking at a twin and earth system, or a complete screwed conduit system?

to be clear it is an old house with large old joists so a conduit system would be very hard and expensive.

Is there a risk assessment for such installations? and is there a wiring spec or IET guidance?


Thanks in advance


Billy


Parents
  • Don't use plastic sheeting, wood, rubber or a screen to close off an area because the mice can gnaw right through it. A mixture of steel wool and caulking compound makes a good plug to seal small openings. You can't use steel wool on its own because the mice will be able to pull it out or chew through it.


    Z.
Reply
  • Don't use plastic sheeting, wood, rubber or a screen to close off an area because the mice can gnaw right through it. A mixture of steel wool and caulking compound makes a good plug to seal small openings. You can't use steel wool on its own because the mice will be able to pull it out or chew through it.


    Z.
Children
No Data