Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 20 replies
  • Subscribers 32 subscribers
  • Views 3213 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Power bank blowing fuses?

Lisa Miles
Hi all


I have a question I hope some of you might know the answer to.


We've recently moved over from a builders electricity supply to a domestic supply on our new build house in France. The electrics have all been checked out and signed off by the Consuel.


I have a two port USB powerbank manufactured by a well known battery manufacturer (?) and I was trying to charge it up while I was there using a native two pin USB charger plug. It basically fried the charger plug but didn't trip the fuse on the main board... 


I then plugged it in to a four socket extension lead (two pin plug to three pin sockets) using a three pin charger plug I have. It blew the extension lead but again didn't trip the fuse on the main board. 


At first I thought it must be a fault with the powerbank but  when I got back to the UK, I plugged it into my usual charger and it charged up as normal... ??


What do you think the problem could be? 

Parents
  • 0

    Lisa Miles:

    Hi all


    I have a question I hope some of you might know the answer to.


    We've recently moved over from a builders electricity supply to a domestic supply on our new build house in France. The electrics have all been checked out and signed off by the Consuel.


    I have a two port USB powerbank manufactured by a well known battery manufacturer (?) and I was trying to charge it up while I was there using a native two pin USB charger plug. It basically fried the charger plug but didn't trip the fuse on the main board... 


    I then plugged it in to a four socket extension lead (two pin plug to three pin sockets) using a three pin charger plug I have. It blew the extension lead but again didn't trip the fuse on the main board. 


    At first I thought it must be a fault with the powerbank but  when I got back to the UK, I plugged it into my usual charger and it charged up as normal... ??


    What do you think the problem could be? 

     




    Perhaps I should have asked the obvious question.

    Were you able to charge up the powerbank on the builder's power supply previously?

Reply
  • 0

    Lisa Miles:

    Hi all


    I have a question I hope some of you might know the answer to.


    We've recently moved over from a builders electricity supply to a domestic supply on our new build house in France. The electrics have all been checked out and signed off by the Consuel.


    I have a two port USB powerbank manufactured by a well known battery manufacturer (?) and I was trying to charge it up while I was there using a native two pin USB charger plug. It basically fried the charger plug but didn't trip the fuse on the main board... 


    I then plugged it in to a four socket extension lead (two pin plug to three pin sockets) using a three pin charger plug I have. It blew the extension lead but again didn't trip the fuse on the main board. 


    At first I thought it must be a fault with the powerbank but  when I got back to the UK, I plugged it into my usual charger and it charged up as normal... ??


    What do you think the problem could be? 

     




    Perhaps I should have asked the obvious question.

    Were you able to charge up the powerbank on the builder's power supply previously?

Children
No Data

Community Rules & Guidelines