Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 29 replies
  • Subscribers 32 subscribers
  • Views 2387 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Compliant?

Zoomup
Is this arrangement compliant or not?


Consumer unit. R.C.D. protected shower circuit supplied by a B40 M.C.B. which runs to a cord ceiling switch  in the shower room in 6.0mm2 T&E. Old electric shower removed. New power shower installed with water supplied from tanks. 0.63 Amp transformer in loft to feed new integral shower pump motor. Loft transformer fed via 3 Amp fused switched fused connection unit on a 1.0mm2 T&E cable from old shower ceiling cord switch. 1.0 mm2 T&E run 2.5 metres.


P.S. The switched fused connection unit is at the end of the supply cables.


Confirmation or condemnation by regs. please.


Z.
Parents
  • 0

    Zoomup:

    The consumer unit is inaccessible.




    Need one say more? 132.12 and 513.1.


    In fact, it is obvious that you wouldn't have raised the question had you not had any uncertainty. From our acquaintance in here, I am sure that you will make the best of what seems to be a bad job.

Reply
  • 0

    Zoomup:

    The consumer unit is inaccessible.




    Need one say more? 132.12 and 513.1.


    In fact, it is obvious that you wouldn't have raised the question had you not had any uncertainty. From our acquaintance in here, I am sure that you will make the best of what seems to be a bad job.

Children
No Data

Community Rules & Guidelines