Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 32 replies
  • Subscribers 27 subscribers
  • Views 949 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Connectors for 200V dc

davidwalker2
I have an installation that uses 200V dc (balanced about earth but not earthed). All the installed equipment is direct wired, but I have an application that needs a plug and socket.  I don't want to use the standard connectors that are also used for ac to avoid ac equipment being plugged in inadvertently.  The equipment in question will draw a current around 8 amps and is metal framed, not double insulated so needs an earth.  I would be grateful for any suggestions/ advice.


I am sure that this has been discussed previously, but I cannot find it on the old forum.


Many thanks,


David
Parents
  • 0
    Many thanks for your replies, and for the Farnell information - I didn't realise it was so complicated!  So, having identified the "approved" connector, I cannot find anywhere to buy them, they do not seem to be in the (UK) Farnell catalogue.


    An alternative I have had suggested is to use a 16A 3-pole Schuko plug and socket.  It is a controlled, industrial situation, and we do not have any equipment on site that uses continental-style connectors, they are readily available and cheap.  Any thoughts?


    David


Reply
  • 0
    Many thanks for your replies, and for the Farnell information - I didn't realise it was so complicated!  So, having identified the "approved" connector, I cannot find anywhere to buy them, they do not seem to be in the (UK) Farnell catalogue.


    An alternative I have had suggested is to use a 16A 3-pole Schuko plug and socket.  It is a controlled, industrial situation, and we do not have any equipment on site that uses continental-style connectors, they are readily available and cheap.  Any thoughts?


    David


Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines