Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 32 subscribers
  • Views 554 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Downlighter trims?

whjohnson
Does anyone know of a 'trim ring' which can be slide over a downlighter can to enable it to be fitted into a hole which is too large for the fitting? I have some very worn and raggy holes in a ceiling and could do with just fitting some kind of trim ring or 'repair washer' over the top of a fire-rated can in order to stop it boinging right up into the ceiling void.

It does need to be fire-rated.
Parents
  • 0
    Not aware of anything commercial but you could get some laser cut from anodised aluminium.  There are plenty of people with laser cutters around and you're just talking circles so easy to programme.


    Peter
Reply
  • 0
    Not aware of anything commercial but you could get some laser cut from anodised aluminium.  There are plenty of people with laser cutters around and you're just talking circles so easy to programme.


    Peter
Children
No Data

Community Rules & Guidelines