Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 32 subscribers
  • Views 886 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Period inspection interval

lyledunn
I am just modifying my condition report templates. I am going to include the the requirements of 653.4 which requires an explanation to support the period determined to the next inspection. That requirement doesn’t seem to have been included in the model form in Appendix 6. Is it included in the NICEIC, NAPIT etc forms?

seems to me that is entirely reasonable to require an explanation as it would, at least for work premises, have cost as well as legal implications.
Parents
  • 0
    At what stage does inspection trump testing? So you have an installation with rusty backboxes, no grommets or fly-leads, short tails, loads of spurs off a small ring; but R1+R2, polarity, and Zs are satisfactory. Do you give a short-term pass or recommend a re-wire?
Reply
  • 0
    At what stage does inspection trump testing? So you have an installation with rusty backboxes, no grommets or fly-leads, short tails, loads of spurs off a small ring; but R1+R2, polarity, and Zs are satisfactory. Do you give a short-term pass or recommend a re-wire?
Children
No Data

Community Rules & Guidelines