This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Some comments please

OK chaps. Bearing in mind this is in Thailand would you be overly concerned, yes it does have a metal cover over the works.


This is a custom board made to fit in a particularly awkward space, I have a local colleague who is branding it "unsafe" but is really unable to explain what his issues are.


Thoughts?

EDIT Please ignore the Schneider labelling on the box, the guts is all non-standard it was just cheaper to buy a suitable unit and remove the works than to get a custom one made.


17281b1ac7b443a61a913d0962525d97-huge-1487305315_afcinstallation27062562_190629_0009.jpg.20baaa8f51b5ce1284911d2cb849f59b.jpg

Parents
  • The CBs look more like DP RCBOs with a 5th earth reference terminal, although Its difficult to be sure from the picture

    The enclosure appears to be earthed by a connection at the top, but the earthing bar appears to be outside the distribution enclosure in what appears to be poorly made off floor trunking.

    The most obvious deviations are the lack of covers over the input terminals at the isolator and neutral bar and the lack of access to the earthing bar.


    Legh

Reply
  • The CBs look more like DP RCBOs with a 5th earth reference terminal, although Its difficult to be sure from the picture

    The enclosure appears to be earthed by a connection at the top, but the earthing bar appears to be outside the distribution enclosure in what appears to be poorly made off floor trunking.

    The most obvious deviations are the lack of covers over the input terminals at the isolator and neutral bar and the lack of access to the earthing bar.


    Legh

Children
No Data