Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 36 replies
  • Subscribers 32 subscribers
  • Views 2730 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VRF Equipment fed off local Lighting Circuits

Eddie Currents
What are your thoughts with VRF Equipment being fed off local Lighting circuits – For me not good practice and strongly oppose this but i cannot find a Clause anywhere in the new Regulations. Has anyone ever come across this before or am i being too pedantic ? The VRF Units will have local isolation but for me its still a problem as you will lose your Lighting if you need to switch off at the Breaker for any reason like switching for Mechanical Maintenance. 

Parents
  • 0
    It's our policy that we isolate power before entering voids due to an historical issue therefore we design out the risk at design stage. If isolators are below ceilings then power is killed before entering the void above to service ny equipment - this is where I'm at - cheers
Reply
  • 0
    It's our policy that we isolate power before entering voids due to an historical issue therefore we design out the risk at design stage. If isolators are below ceilings then power is killed before entering the void above to service ny equipment - this is where I'm at - cheers
Children
No Data

Community Rules & Guidelines