My house had a new consumer unit fitted in 2005 it's partly fitted with RCBOs and partly with MCBs it was installed by the DNO who are SSE in this area bearing in mind the year it was installed are the rcd fitted likely to be electronic type or plain electromechanical ones I'm asking out of curiosity because if ever there's a fault in my workshop ( for this read that I make a mistake or an error when experimenting) usually the house RCD trips despite me having an electronic plug in one on my test bench supply which I think should fire first ide really appreciate your wise words on this thanks x Kelly
Hi I finally got a double socket with 10mA RCD it works great Interstingy it tripped when I plugged in my socket tester I measured its current consumption of it and it showed as 10 .2 mA so the new device is very sensitive it's now properly installed so I'm happy
Hi I finally got a double socket with 10mA RCD it works great Interstingy it tripped when I plugged in my socket tester I measured its current consumption of it and it showed as 10 .2 mA so the new device is very sensitive it's now properly installed so I'm happy
