Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 32 subscribers
  • Views 791 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Insulation Resistance Testing

Chivers
Hi,


I work as a Maintenance Electrician and part of my Testing role is to complete Insulation resistance testing on Supply cables between Metal cabinets on Highways Equipment - Normally Armoured or similar.


I have had 2391 since 2006 and at no point in my Testing Course did i ever come across something a colleague of mine seems to be insisting we all do. That is "Conductor to Ground Testing". I have in the past completed Phase to Neutral, Neutral to Earth and Earth to Phase and recorded these on my test certificates (All supplies are single phase). As far as I know there is nowhere to record such tests on any software or sheets I have seen. Am I missing something fairly obvious or does this seem pointless to others too? 


Regards Chivs
Parents
  • 0
    100% agreed on sensitively phrased.... this thread has brought up a few points i'd not considered, but people, especially in this trade, seem to hate their 'normal routine' being questioned (myself included)
Reply
  • 0
    100% agreed on sensitively phrased.... this thread has brought up a few points i'd not considered, but people, especially in this trade, seem to hate their 'normal routine' being questioned (myself included)
Children
No Data

Community Rules & Guidelines