Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 19 replies
  • Subscribers 32 subscribers
  • Views 1737 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Star-Delta motors on plugs and sockets

Johno12345
Is there a convention when putting a 7 pin plug on a star-delta motor?

im going to specify it for a job, but am predicting the 'its pointless as the wiring isnt standardised'


Thanks
Parents
  • 0
    no PLC in this setup, its all relay logic, and very basic


    just has the typical stop circuit linking the trips on the contactors, and a single stop button on the control panel.
Reply
  • 0
    no PLC in this setup, its all relay logic, and very basic


    just has the typical stop circuit linking the trips on the contactors, and a single stop button on the control panel.
Children
No Data

Community Rules & Guidelines