Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 19 replies
  • Subscribers 32 subscribers
  • Views 1737 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Star-Delta motors on plugs and sockets

Johno12345
Is there a convention when putting a 7 pin plug on a star-delta motor?

im going to specify it for a job, but am predicting the 'its pointless as the wiring isnt standardised'


Thanks
Parents
  • 0
    on the other hand, providing local isolation for the motor, without modifying the stop circuit would be different?


    for some background, on this setup, the wiring, which is fairly extensive is existing, and the control panel was replaced and arrived on-site as a CE marked assembly, and was just connected to the existing wiring.
Reply
  • 0
    on the other hand, providing local isolation for the motor, without modifying the stop circuit would be different?


    for some background, on this setup, the wiring, which is fairly extensive is existing, and the control panel was replaced and arrived on-site as a CE marked assembly, and was just connected to the existing wiring.
Children
No Data

Community Rules & Guidelines