I recently purchased 2 little voltmeters they look like the sort that would go in a control or instrument panel they are connected with just 2 wires which provide the operating supply ( they light up green and red) however the green one states it will work between 20and 500 volts and the red one between 60 and 480 volts. When they are both on the green one indicates normally around 241 volts the red one shows 235 volts why the discrepancy I know it's not much but makes you wonder if one of them is lying. Secondly I've noticed that the green one tracks voltage changes faster than the red one and that a few times the green one jumps down to 238 then up to 241 multiple times while the red one stays the same and I think can see a slight flicker in my filament lamps when this is happening incidentally both meters are connected to the same plug a 2 pin 5 amp one
Hi again the reason for my original question was because I bought 2 voltmeters that gave slightly different readings from the same source and I just wanted to know why which I now do so in a way I've got my answer and I think my next move will be to try to get a true RMS meter which will happen soon I hope. The next point is that I wanted to find out how is that he 3rd harmonic current able to flow the opposite way to the main current i think I sort of understand now is it in the same way as other much higher frequencys travel back up the supply wiring? As I understand it these multiples of 50 cycles can go up to 500 odd Kilocylcles I hope I'm some where near to being right
Hi again the reason for my original question was because I bought 2 voltmeters that gave slightly different readings from the same source and I just wanted to know why which I now do so in a way I've got my answer and I think my next move will be to try to get a true RMS meter which will happen soon I hope. The next point is that I wanted to find out how is that he 3rd harmonic current able to flow the opposite way to the main current i think I sort of understand now is it in the same way as other much higher frequencys travel back up the supply wiring? As I understand it these multiples of 50 cycles can go up to 500 odd Kilocylcles I hope I'm some where near to being right
