Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 34 replies
  • Subscribers 32 subscribers
  • Views 3452 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Orange Alu Split Con

Martyn
Hi All, 


As per the title I need a 25m ish length of 25mm Orange Alu split con, cant seem to get it from the cable suppliers unless I order to be manufactured with crazy minimum order quantities.


Cant use standard Split con as it’s PVC and I need LSF for an escape route, cable forming part of a BNO replacing a degraded cotton service.


It’s only manufactured in 25 & 35mm apparently, could use either but prefer 25mm.


Anyone with a short length?


Cheers


Martyn
Parents
  • 0
    The newer standard ( BS 7870) cables have fully insulated neutrals, rather than the coated conductors, covered with polymeric blue insulation. I have a mock up meter board with a series 8 head and meter with a split con. cable supply and an earthing conductor to an earth block. for teaching purposes. Before I remove the chamber under the cut out most student say the means of earthing is PME, when I remove the chamber they change their minds. Then I take off the head cover and show them the removable link. I expalin that if this head is on the BNO network the link must be removed.


    If someone can tell me how to post a photo here I will post a photo of a 3 phase BNO supply with split con. terminated in a series 8 head?
Reply
  • 0
    The newer standard ( BS 7870) cables have fully insulated neutrals, rather than the coated conductors, covered with polymeric blue insulation. I have a mock up meter board with a series 8 head and meter with a split con. cable supply and an earthing conductor to an earth block. for teaching purposes. Before I remove the chamber under the cut out most student say the means of earthing is PME, when I remove the chamber they change their minds. Then I take off the head cover and show them the removable link. I expalin that if this head is on the BNO network the link must be removed.


    If someone can tell me how to post a photo here I will post a photo of a 3 phase BNO supply with split con. terminated in a series 8 head?
Children
No Data

Community Rules & Guidelines