Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 32 subscribers
  • Views 6088 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Selection of MCB for SPD protection

Julien Leblanc
Hello,

I need to install a type 1+2 SPD into the main panel of a small business building, which needs lightning protection.

The main breaker in the main panel is a 4 poles 40A MCB.

I was looking for a SPD and I found this: Schneider A9L16634.

In the technical specification sheet it says "Associated circuit breaker NG125N 80A curve C - Icu 15 kA".

I was wondering why the associated breaker needs to have such a high current (80A)? It seems i cannot ensure the selectivity of the breakers.

Could anyone explain what can happen if i use a smaller breaker, for example a 32A one for the protection of the SPD?


Thank you.




Parents
  • 0
    On a similar note, I have a 'Fusebox' branded 10 way CU to fit. The unit comes complete with pre-assembled SPD protection built in.

    The interesting thing is that there is no protective device - the SPD tails are wired directly into the bottom of the main switch.
Reply
  • 0
    On a similar note, I have a 'Fusebox' branded 10 way CU to fit. The unit comes complete with pre-assembled SPD protection built in.

    The interesting thing is that there is no protective device - the SPD tails are wired directly into the bottom of the main switch.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines