The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 19 replies
  • Subscribers 31 subscribers
  • Views 2646 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Extractor Fan Lubrication.

Zoomup
Would you lubricate a fan motor this way?

https://www.youtube.com/watch?v=Asf3C_LflFs


Z.
Parents
  • 0
    This person has dismantled the motor to lubricate the bearings. The bearings are just a phosphor bronze sleeve with no balls or rollers. The light oil is good. A light mineral or synthetic machine oil is best. Some bearings have oil retaining felt pads to retain oil and slowly release it to the bearing, so quire a lot of oil will be absorbed by the felt pads when re-oiling them. This regular lubrication will be dependent on motor use and temperature of operation, but annually is good as the mineral oil can evaporate or dry out over time. If lubricated regularly a motor can last for many years.

    https://www.youtube.com/watch?v=hNzsJk_bQKY


    The use of pliers on nuts is NOT recommended as it can damage them. The use of the correct sized spanner or socket is better. Do not overtighten the nuts.


    Z.

Reply
  • 0
    This person has dismantled the motor to lubricate the bearings. The bearings are just a phosphor bronze sleeve with no balls or rollers. The light oil is good. A light mineral or synthetic machine oil is best. Some bearings have oil retaining felt pads to retain oil and slowly release it to the bearing, so quire a lot of oil will be absorbed by the felt pads when re-oiling them. This regular lubrication will be dependent on motor use and temperature of operation, but annually is good as the mineral oil can evaporate or dry out over time. If lubricated regularly a motor can last for many years.

    https://www.youtube.com/watch?v=hNzsJk_bQKY


    The use of pliers on nuts is NOT recommended as it can damage them. The use of the correct sized spanner or socket is better. Do not overtighten the nuts.


    Z.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines